ES-STONE LW 400
It is a two-component room-temperature curing product using Methyl Methacrylate Resin.
It is a high-performance paint with excellent composition and corresponds to Korean Industrial Standard KS M 6080 type 5, and is used to mark lines on road surfaces, runways, etc.
It is used. Environmental label certification was granted by the Korea Environmental Industry & Technology Institute for the reasons of reducing local environmental pollution, reducing hazardous substances, and reducing air pollutants.
TWO- COMPONENT COLD PLASTIC
Specificity
Excellent adhesion to asphalt.
It has excellent wear resistance and impact resistance and is highly durable.
Excellent low-temperature hardening in winter.
This is a room-temperature curing product and does not require any other heat source.
Excellent adhesion to glass beads.
This is a P7-R5/RW4, P7-R4/RW4 grade product.
USAGE SECTION
Centerline of the road, road boundary line, no passing line, crosswalk line, stop line, parking line, letter symbol, etc.
Paint for road markings that require retro-reflectivity performance
ES-STONE LW 400 INTRODUCTION
Appearance "Liquid A (subject): Liquid;
Liquid B (hardener): White powder, solid content of approximately 99%
Recommended film thickness 1~2mm Theoretical requirement 2.4Kg/㎥ (based on 2mm thickness)
Viscosity 45000 or less (CPS/25℃) Expiration date "6 months
"Period under 25℃/indoor storage/sealed conditions)"
Packaging unit "Liquid A (subject): 25Kg (12.5L), 20Kg (10L), 15Kg (7.5L)
Liquid B (hardener): 500g, 300g, 200g
"Dilution ratio" hardening accelerator:
25g~50g (spring/autumn 5℃~15℃)
50g~150g (below 5℃ in winter)
UP softener: 0.5"
Exclusive hardening accelerator A2 accelerator Exclusive softener UP softener
Curing time: within 15 minutes (25℃),
vehicle travel time: 30~60 minutes
